REXROTH比例流量閥型號,rexroth比例流量閥結構圖
如果您對該產品感興趣的話,可以
產品名稱: REXROTH比例流量閥型號,rexroth比例流量閥結構圖
產品型號: ABZMM100-250BAR/MPA-R/B-G
產品展商: BOSCH-REXROTH
產品文檔: 無相關文檔
簡單介紹
REXROTH比例流量閥型號,rexroth比例流量閥結構圖
Main valve (2) With spool (3)
Pilot control valve (4) with proportional solenoid (5)
General function:
(3) of the orifice (3), thereby defining the opening of the aperture (8)
REXROTH比例流量閥型號,rexroth比例流量閥結構圖
REXROTH比例流量閥型號,rexroth比例流量閥結構圖
的詳細介紹
REXROTH比例流量閥型號,rexroth比例流量閥結構圖
The vibration absorption is increased by the pilot oil bypass of the nozzle (16)
When the enable is disengaged,
the orifice spool in the seat will stop (close position) and prevent flow from A → B
The flow depends on the Δp on the orifice and the position of the orifice (3)
Through the position sensor for the hole spool (the actual value of the location record;
Comparison of command / actual values in electronic equipment (
6); as a change in the control output is prepared and output as a control,
For correcting the position of the throttle spool (3) to
the proportional solenoid (5) to the pilot control valve (4)
Use the external pilot oil supply, in order to make the valve work,
X pressure must be ≥ A in the pressure
The pilot valve position with the command value 0 V or 4 mA has been adjusted and
the orifice is still in the positive overlap and blocks A → B
At the command value 0 V or 4 mA and in the inactive state,
the technical data can be viewed via the zero flow on the nozzle spool and pilot control valve
FE valves are pilot two-way proportional throttle valves for block installation for continuous control of flow.
Technical setup
The valve consists of four main components:
The cover (1) has a connection surface for pilot oil connection
Area ratio (15) and area (12) = 1: 1
Flow to A → B; connect X to A or connect from outside
REXROTH比例流量閥型號,rexroth比例流量閥結構圖
